Baby Lock Gallant XL Stationary handleiding
Handleiding
Je bekijkt pagina 32 van 60
32 | www.BabyLock.com
Threading the Needle with the Needle Threader
1. Turn o the power to the machine.
2. Hold the needle threader by the grip, with the triangle mark facing up.
3. Guide the thread, inserting it into the Y groove from right to left horizontally.
4. Place the V groove around the needle, above the eye.
5. Slide the automatic threader down the needle, while pushing it gently against the needle,
until the threader pin goes into the needle eye.
6. Push the grip gently. You should see the threader pin and thread loop at the back of Remove
the threader from the needle slowly, then pick up the loop with the hook on the threader,
pulling the end of the thread out to the back.
7. Turn machine power back on.
Bekijk gratis de handleiding van Baby Lock Gallant XL Stationary, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baby Lock |
| Model | Gallant XL Stationary |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10206 MB |
