Baby Lock Gallant Longarm handleiding
Handleiding
Je bekijkt pagina 53 van 58
Gallant User Manual | 53
Troubleshoong
You can correct many problems on your own. If you need addional help, contact your local, authorized
Baby Lock retailer who supports you and your machine. You can also contact Baby Lock Product Support at
800-313-4110 or www.babylock.com/support/contact.
First check the following:
1. The AC power cord is properly connected (at both ends) and the power switch is turned on.
2. Conrm that all cables are properly seated into their connecons.
3. Turn o the machine completely. Wait for at least ten seconds and then turn it back on.
If the above checks do not solve the problem, refer to the informaon below.
Skipped Stches Correcve Measure(s)
The needle is damaged, dull,
bent, or installed improperly
• Replace the needle oen, normally once or twice per day for
connuous quilng or at least once per quilt. Use only the
recommended needle system.
• Always change the needle if the needle has struck any hard object
such as a pin. The p of the needle can become damaged or
burred, resulng in fabric damage, as well as skipped stches,
thread breakage, or shredding.
• A lways change the needle if it has been hit, bumped or pulled o
center while maneuvering the machine over the quilt. A slightly
bent needle can be a major cause of skipped stches.
Incorrect needle size • Use the proper size needle for the job. Start with matching the
needle size with the thread; consult the chart on your Gallant
Quick Reference Card. Some bangs and fabrics used in quilng
may require a larger size needle.
• You will need to experiment to determine which works best with
your combinaon of fabric, thread, and bang.
Fabric is too ght on the frame • Loosen the fabric tension on the frame. Fabric that is tensioned
too ghtly causes the fabric to bounce while quilng. This can
result in skipped stches.
Thread tension too ght • Check bobbin case tension and then check top thread tension.
For more informaon about adjusng tension, see Bobbin and
Bobbin Tension in the Using Your Machine secon of this manual.
Improper threading • Ensure that the machine is threaded correctly. Refer to your
Gallant Quick Reference Card if needed.
Bekijk gratis de handleiding van Baby Lock Gallant Longarm, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baby Lock |
| Model | Gallant Longarm |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12386 MB |
