AYA DB6BLNE handleiding
Handleiding
Je bekijkt pagina 84 van 92
ERROR CODES
If there is a malfunction, the dishwasher will display error codes to identify these:
Meanings
Possible CausesCodes
Longer inlet time.
Not reaching required
temperature.
Overflow.
Malfunction of heating element.
Some element of dishwasher leaks.
Faucets is not opened, or water intake is
restricted, or water pressure is too low.
WARNING
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, the water
should be removed before restarting the dishwasher.
The Rapid light
flicker fleetly
The ECO light
flicker fleetly
The Rapid and 90 min
light flicker fleetly
Open circuit or break wiring for the
communication.
Failure of communication
between main PCB with
display PCB.
The ECO, Rapid and
Universal indicator
flicker fleetly
-80-
USAGE COUNTER
3. For example, 1234 cycles will indicated as below illustration.
Since this model has no display screen, the cycles number will informed by using
4 LEDs, the detailed introduction is as follows:
1. When the power cord is connected, but the dishwasher is not turned on, close the
door, press and hold the Delay button for 5 seconds, the dishwasher display
will show the usage count;
2. The counting will be done from units to thousands sequence as below: Rapidflash
indicate units of cycles, 90 min flash indicate tens of cycles, ECO flash indicate
hundreds of cycles, Universalflash indicate thousands of cycles;
1234 cycles
Bekijk gratis de handleiding van AYA DB6BLNE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AYA |
| Model | DB6BLNE |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9362 MB |
