AYA DB6BLNE handleiding
Handleiding
Je bekijkt pagina 78 van 92
button, the dishwasher will start its cycle.
Changing The Program Mid-cycle
A wash cycle can only be changed if it has been running for a short time otherwise,
the detergent may have already been released and the dishwasher may have already
drained the wash water. If this is the case, the dishwasher needs to be reset and the
detergent dispenser must be refilled. To reset the dishwasher, follow the
instructions below:
1.
2.
3.
4.
Press the Start/Pause button to pause the washing.
Press Program button for more than 3 seconds - the program will cancel.
Press the Program button to select the desired program.
Press the Start/Pause button, after 10 seconds, the dishwasher will start.
3 sec
Starting A Cycle Wash
1. Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to last page ”Product fiche”.
Make sure that the water supply is turned on to full pressure.
4. Close the door, press the Power button, to switch on the machine.
5.
Choose a program, the response light will turn on. Then press the Start/Pause
-74-
Washing tableware in a household dishwasher usually consumes less energy and water
in the use phase than hand dishwashing when the household dishwasher is used
according to the instructions.
Loading the household dishwasher up to the capacity indicated by the manufacturer will
contribute to energy and water savings.
The values given for programmes other than the eco programme are indicative only.
Bekijk gratis de handleiding van AYA DB6BLNE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AYA |
| Model | DB6BLNE |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9362 MB |
