Axis AX-VB3 handleiding
Handleiding
Je bekijkt pagina 18 van 20
- After doing this, ensure that both the bottom slide (15) and the upper slide (3)
are aligned.
- Mount the original skewer turning arm to the top of the skewer, and rotate the
skewer using this arm. Doing this, higher hygiene and safety will be maintained
by enabling you to avoid the contact with the hot and fatty meat.
Unscrew the fixing bolt (5) of the telescopic skewer supporter. By doing this, the
telescopic skewer supporter (1) will be raised up by the spring mechanism.
Unscrew the skewer fixing screw (12).
Insert the lower end (2) of the skewer with meat on, onto the skewer guide (22).
Do not tighten the skewer fixing screw (12). Otherwise you will not be able to
rotate the skewered meat.
Pushing the telescopic skewer supporter holding arm (4) down, insert the upper
side of the skewer (2) with meat on into the guide located on this arm.
Tighten the fixing screw (5) of the telescopic skewer supporter.
Your appliance is ready for use without motor. Unplug the appliance from power
supply during operation without motor.
NOTE: THOSE APPLIANCES HAVING A 3-DIGIT PRODUCT CODE ARE NOT
EQUIPPED WITH A TELESCOPIC SKEWER SUPPORTER. TAKING THIS INTO
ACCOUNT FOLLOW THE INSTRUCTIONS BELOW FOR THESE APPLIANCES:
Unscrew the skewer fixing screw (12).
Insert the lower end (2) of the skewer with meat on, onto the skewer guide (22).
Do not tighten the skewer fixing screw (12). Otherwise you will not be able to
rotate the skewered meat.
Your appliance is ready for use without motor. Unplug the appliance from power
supply during operation without motor.
3 – OPERATION AND MAINTENANCE INSTRUCTIONS
Bekijk gratis de handleiding van Axis AX-VB3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axis |
| Model | AX-VB3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2579 MB |
