AVUE AV164WDIP-2812SZ handleiding
Handleiding
Je bekijkt pagina 13 van 32
Network Bullet Camera·Quick Operation Guide
12
12
● Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing reflection.
● The foam ring around the lens must be seated flush against the
inner surface of the bubble to isolate the lens from the IR LEDS.
Fasten the dome cover to camera body so that the foam ring
and the dome cover are attached seamlessly.
2.1 SD Card Installation
Steps:
1. Rotate the lock screw counterclockwise to loosen it. Slide the sun
shield according to the arrow direction as shown in 0(left).
2. Remove the sun shield as shown in 0(right).
3. Remove the front cover by rotating it counterclockwise as shown
in 0(right).
Figure 2-1 Disassemble the Camera
Lock Screw
Bekijk gratis de handleiding van AVUE AV164WDIP-2812SZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AVUE |
| Model | AV164WDIP-2812SZ |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 2938 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Gewicht | 1200 g |
| Breedte | 90 mm |
| Soort | IP-beveiligingscamera |
| Internationale veiligheidscode (IP) | IP66 |
