AVUE AV134WDIP-60 handleiding
Handleiding
Je bekijkt pagina 11 van 23
Network Bullet Camera·Quick Operation Guide
10
10
● Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing reflection.
● The foam ring around the lens must be seated flush against the
inner surface of the bubble to isolate the lens from the IR LEDS.
Fasten the dome cover to camera body so that the foam ring
and the dome cover are attached seamlessly.
Steps:
1. Drill the cable hole and the screw hole in the ceiling according to
the supplied drill template.
Figure 2-1 The Drill Template
2. Hammer the supplied plastic expansion bolt into the screw holes.
3. Route the cables to the cable hole and connect the corresponding
power cable and video cable
4. Fix the camera to the wall with the supplied screws
2:Screw Hole for
Mounting Base
1:Screw Hole for
Bracket
2
1
Ceiling Mounting
2
2
2
1
1
1
Bekijk gratis de handleiding van AVUE AV134WDIP-60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AVUE |
| Model | AV134WDIP-60 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 642 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Gewicht | 1200 g |
| Breedte | 86.48 mm |
| Hoogte | 85.11 mm |
| Soort | IP-beveiligingscamera |
