AVUE AV104WDIP-40 handleiding
Handleiding
Je bekijkt pagina 11 van 22
Network Bullet Camera·Quick Operation Guide
10
10
● Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing reflection.
● The foam ring around the lens must be seated flush against the
inner surface of the bubble to isolate the lens from the IR LEDS.
Fasten the dome cover to camera body so that the foam ring
and the dome cover are attached seamlessly.
Steps:
Attach the drill template on the wall. 1.
Figure 2-1 Attach the template
Secure the camera to the ceiling with the supplied expansion 2.
screws.
Screw Hole
Template
Bekijk gratis de handleiding van AVUE AV104WDIP-40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AVUE |
| Model | AV104WDIP-40 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 636 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Gewicht | 500 g |
| Breedte | 60.4 mm |
| Hoogte | 76.9 mm |
| Soort | IP-beveiligingscamera |
