AVPro Edge MXNet AC-MXNET-1G-AVDM Handleiding (78 Pagina's)

Handleiding

Page 26 of 78

MXNET 1G USER MANUAL

3.8 AC-MXNET-SW48

48-Port Network Switch Front Panel

48-Port Network Switch Rear Panel

1

ACTIVITY LIGHTS 1-48

•

Green LED status indicator lights

• Steady flickering green lights to indicate network activity is present

2

MODE BUTTON

•

Press to toggle on/off the PoE status light.

3

SYSTEM STATUS

LIGHTS

•

POE LED remains solid green to indicate PoE is present on the switch

• DIAG LED steadily flashes green to indicate a continuous diagnostic of

the system is running on normal operations

• PWR LED remains solid green to indicate the switch is powered on

• MGMT LED steadily flashes green to indicate a stable link is present on

the MGMT port

4

USB 2.0 PORT

• Used for managing the switch’s network configuration settings

5

MGMT PORT

•

8-pin RJ-45 female connector port

• Used for managing the switch’s network configuration settings and

tracking system data.

• Connects to any port (2-7) on the AC-MXNET-CBOX for tracking switch

performance using the Mentor web UI.

NOTE: This is a required physical connection in order to fully access the

switch’s Switch Management page within the Mentor web UI.

6

CONSOLE PORT

•

8-pin RJ-45 female connector port

• Used for accessing the MXNet CLI (Command Line Interface)

7

1GbE COPPER PoE

PORTS 1

-48

•

(48x) 8-pin RJ-45 female connector ports, 1000BASE-T copper Ethernet

• Supports standard PoE power, IEEE 802.3AF (15.4 W)

• Maximum power consumption of 6.5 W

• 10/100/1000Mbps auto-negotiation

• MDI/MDI-X cable mode auto-negotiation

• Maximum distance 100m (330ft) over Cat5e and higher

• Connects to the encoders and decoders

Bekijk gratis de handleiding van AVPro Edge MXNet AC-MXNET-1G-AVDM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.