Handleiding
Je bekijkt pagina 14 van 197
13
④ Installing an OPS
1. Ensure that the display is turned off.
2. Use a Philips screwdriver to unscrew the OPS slot shield on the display input panel. Do not lose the screws
that are removed.
3. Install the OPS module by sliding it into the OPS slot until you hear a click, indicating the module is securely
inserted. When using an Avocor OPS PC, the fan should be visible.
4. Secure the OPS module in position by screwing it onto the display input panel using the screws that were
removed earlier.
5. Ensure the installation is complete before turning on the power.
6. Turn on the display. When using an Avocor OPS PC you should see a green light on the side of the OPS, this
will indicate that the OPS PC is switched on and operational.
When installing or de-installing an OPS PC, the display must be switched off. If the display is on when
performing the installation or deinstallation of the OPS PC, this could cause damage to either the display or OPS PC
invalidating the warranty for both.
Bekijk gratis de handleiding van Avocor AVA-6520, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Avocor |
| Model | AVA-6520 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 48467 MB |
