AVMATRIX PKC4000 handleiding

31 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 12 van 31
PTZ Camera Controller
PKC4000
9
camera preset position.
Supports quick call preset positions 1 to 9.
Multi-function digital panel
34. Numeric buttons: These numeric buttons allow you to
enter numbers, letters, etc. It can be used to set controller IP,
camera IP, set/call/clear camera preset positions, etc.
Press once on the number panel to enter the corresponding
number, and press twice or more to enter the corresponding
letter;
The following buttons are commonly used buttons:
35. “<” Button: Delete the previous character.
36.
Button: Recall the preset position or camera track
recording. Input the number on the panel, then short press
the
button to call the corresponding preset position; Input
the number on the panel, then long press the
button to call
the corresponding track recording.
PTZ Joystick & PT speed knob
37. PT Speed Knob: Controls the speed of the camera pan and
tilt.
38. PTZ joystick
Used to control camera motion:
Move the rocker up/down to adjust the camera tilt angle.
Move the joystick left/right to control the camera panning
left/right.
Rotate the joystick left/right to control the camera zoom.
Press the top button on the joystick to lock the joystick so it
cannot control camera pan/tilt movements.
Used to adjust the camera menu when the camera menu is
called up:
Move the PTZ joystick up or down to select menu options.
Rotate the PTZ joystick left and right to call out the upper and
lower sub-menus, turn left to return to the upper menu, and turn
right to enter the lower menu.
Move the PTZ joystick left and right to adjust and modify the
menu values.

Bekijk gratis de handleiding van AVMATRIX PKC4000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAVMATRIX
ModelPKC4000
CategorieBewakingscamera
TaalNederlands
Grootte11040 MB