AVMATRIX K2-N handleiding
Handleiding
Je bekijkt pagina 20 van 31
18
4.3.4 How to add multiple PTZ cameras
Repeat 4.2.1 Search Camera and 4.2.2 Manually Add Camera to add multiple cameras, but please
note:
When using the LAN port to connect multiple cameras at the same time, IP addresses of the cameras
cannot be the same.
When connecting multiple cameras using the same serial interface and protocol, the Addr between the
cameras cannot be the same and should be set to 1, 2, 3…
4.3.5 How to call the camera
After adding the camera, you can quickly call the camera through the camera management keyboard.
The "GROUP" button and the "CAM" button are status buttons. Press them to switch the operation mode
of the number buttons below. Press the number buttons below to quickly call the corresponding camera
group or camera.
The "GROUP" button indicator is on: In camera group selection mode, press the number keys below
to quickly select the camera group.
The "CAM" button indicator light is on: In camera selection mode, press the number keys below to
quickly call the corresponding camera in current camera group. When the camera is connected
successfully, the corresponding number keys will light up blue as an indication.
4.4 Camera Info Setting
The camera parameter settings can be adjusted here. (This function is designed for LILLIPUT C20/C30
cameras, and some brands of cameras may not be compatible)
4.4.1 Exposure Setting
Bekijk gratis de handleiding van AVMATRIX K2-N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AVMATRIX |
| Model | K2-N |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 7476 MB |
