AVMATRIX EAGLE P20 4K handleiding
Handleiding
Je bekijkt pagina 8 van 44
6 7
① Lens
This lens is an optical zoom lens, when the DZOOM function is turned on in the
menu, the camera can zoom in digital up to 10 times.
② Front-side Tally light
When receiving the VISCA tally command, the camera lights up the red or green
tally light (the color depends on the command), and you can choose HIGH,
MID, LOW, OFF and other options in the tally mode of the menu to control the
brightness of the Tally light or turn off the tally light.
③ IR Receiver
These sensors are used to receive the IR signal from the remote.
④ Backside Tally Light
When VISCA tally command is received, it will be on or off synchronously with
the front tally light.
⑤ Power Indicator Light
When the camera is powered on, the green POWER indicator is on, and when
the camera self-checking is completed, the green indicator flashes 3 times and
then stays on. if the camera receives an operation instruction from the provided
infrared remote control, the green indicator light will be flash. When the camera
enters standby mode, the green light turns off.
⑥ Standby Indicator Light
When the camera is powered on, the red standby indicator light is on, and when
the Camera self-checking is completed, the red indicator light flashes 3 times and
then goes out. When the camera enters standby mode, the red indicator light is
always on.
⑦ Tail IR Receiver
Used to receive the infrared signal of the remote control.
4K Ultra HD PTZ Camera
Bekijk gratis de handleiding van AVMATRIX EAGLE P20 4K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AVMATRIX |
| Model | EAGLE P20 4K |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 5998 MB |
