AViPAS AV-2000W handleiding
Handleiding
Je bekijkt pagina 22 van 39
18
How to use VISCA over IP
VISCA Command
Commands are sent from controller to camera, and when camera receives the commands, it returns
ACK. When the command is executed, a complete message will be returned.
VISCA Inquiry
Inquiry is sent from controller to camera, and when camera receives the command, it will return
required message.
VISCA Reply
Reply is sent from camera to controller. ACK, which is the complete message, can be either reply or
error reply.
Command format: Note that LAN output is big-endian, and LSB is in the front.
Payload type: data definitions are listed below:
Name Value (Byte 0) Value (Byte 1) Value
VISCA command 0x01 0x00 Stores VISCA command.
VISCA inquiry 0x01 0x10 Stores VISCA inquiry.
VISCA reply
0x01 0x11
Stores reply for VISCA command and VISCA
inquiry, or VISCA device setting command.
VISCA device
setting command
0x01 0x20
Stores VISCA device setting command.
Control command 0x02 0x00 Stores control command.
Control reply 0x02 0x01 Stores reply for the control command.
Payload length: Valid data length in Payload (1~16), is the command length. For example, when valid data
length is 16-byte, Byte 2: 0x00; Byte 3: 0x10. Controller will save the sequence number of each command.
When one command is sent, the sequence number of that command will add 1; when the sequence number
reaches its max, it will return back to 0. The camera will save sequence number of each command, and return
the sequence number to controller.
Bekijk gratis de handleiding van AViPAS AV-2000W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AViPAS |
| Model | AV-2000W |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 4747 MB |
