AVer E12 handleiding
Handleiding
Je bekijkt pagina 23 van 28

13
Desk mount (Optional)
1. Remove the pre-installed screws on the top of cable grommet on each side
(See the figure as below for exact locations).
2. Determine the appropriate L- shaped mounting bracket location and fix
2 x L- shaped mounting bracket with screws.
3. Secure the station to the wall studs for drywall mounting. Drill the holes at the
wall studs through the drywall, and firmly tap 4 x drywall anchors in until they
are flush with the wall.
4. For concrete wall mounting, please use 4 x concrete anchors and fully flush
the anchors to the drilled holes.
5. Secure the charging station to the wall with 4 x anchor screws (with 4 x
washers).
[Note]
Please note that the charging station needs to be placed on the desk. The
unit may be secured to the surface by inserting 2 screws appropriately.
The station must be installed by a qualified technician. Use suitable mounting
means when installing to cinder block, concrete or drywall.
It is recommended to use a screwdriver to loosen the screws.
Bekijk gratis de handleiding van AVer E12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AVer |
| Model | E12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2304 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Blue, White |
| Gewicht | 17000 g |
| Breedte | 527 mm |
| Diepte | 453 mm |
| Hoogte | 445 mm |
