Handleiding
Je bekijkt pagina 113 van 114
102
Troubleshooting
Symptom
Possible Cause
Solution
The screen does not
display anything; there is no
sound, and the
indicator does not come on
Looseness of power plug,
power connection failure
Check if the power cord is
properly connected
Pictures are colorless
Color saturation is set too
low
Enter “Picture” settings to
increase the color
saturation
The product has no
accompanying sound
1. Volume is set too low
2. Sound is muted
1. Adjust the volume to a
proper level
2. Press the “MUTE” key on
the remote control to
unmute the product
The PC does not display
anything, and gives a
prompt indicating no signal
input; the red indicator
blinks
Looseness or come-off of
the signal connection cable
Check if the signal
connection cable is
loosened
or comes off; if so,
reconnect it
Pictures shown on the
PC are offset, do not cover
the entire screen, go
beyond the screen, or are
blurred
1. Improper adjustment
2. Wrong display mode
1. Use the auto adjustment
function
2. Enter “PC Screen
Adjustment” to adjust the
horizontal or vertical
position
3. Use the recommended
mode
Short remote control
distance, malfunction of
remote control
1. The remote receiver of
the product is blocked by
some object
2. Battery level of the
remote control is low
1. Move the object to avoid
blocking the remote
receiver
2. Replace the battery
The white noise problem
has occurred on screen
when MAC computer
connect with HDMI in 3840
x 2160 30Hz setting
Might be the compatibility
issue
Please change to HDMI 4
connection for normal
output
Bekijk gratis de handleiding van AVer CP864I, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AVer |
| Model | CP864I |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 17586 MB |
