Avenview HDM-C6MWIP-R-V3 handleiding
Handleiding
Je bekijkt pagina 20 van 24
17
6. TROUBLESHOOTING
Problem Possible Solution
PC Configurator cannot find
devices
1. Check the Windows Firewall.
Taking Windows 7 as an example: Click Start menu, go to Control Panel
> System and Security > Windows Firewall > Allowed Programs, select
Home/Work (Private) and Public for PC configurator.
2.
Check the IP address and subnet mask of your computer.
The computer, Sender, Receiver and switch should be in the same
network segment. Therefore, set your computer's IP address as
169.254.X.X and subnet mask as 255.255.0.0.
For more information, see the description in the networking guide.
Display Showing No Picture
1.
Check all devices are powered on.
2.
Check all cables are securely seated and connected properly.
3.
Check the LED STATUS indicators on the Receivers to see if Senders and
Receivers are linked correctly. Blue Steady=OK Blue Blinking=standby
To link the devices use the PC configurator on your PC/Laptop, drag the
TX to the RX and click apply.
4.
Check that source device is powered on and the HDMI cable is
connected.
PC Configurator (HDMI over IP)
Maintain Tool
3.
Check the switch configuration, and that IGMP snooping and all the
other functions are enabled.
Check the displays are powered on and the correct input selection.
Check the HDMI cable is plugged into the correct port.
www.avenview.com
Bekijk gratis de handleiding van Avenview HDM-C6MWIP-R-V3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Avenview |
| Model | HDM-C6MWIP-R-V3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6577 MB |
