Avenview HDM-C6MWIP-R-V3 handleiding
Handleiding
Je bekijkt pagina 14 van 24
11
4. PC CONFIGURATOR
4.1 Setting a Static IP on Your Computer
Before using the Avenview PC Configurator, please ensure you download the most recent version from the product
HDM-C6MWIP-S Sender and HDM-C6MWIP-R Receiver website link /downloads PC control software .
All devices must be are in the same network segment. To verify and properly control the devices, please set a static IP
on your computer. See the instructions below if not sure on how to proceed:
The Sender and Receiver units are pre-configured with AutoIP. Upon connecting the units to a stand alone network
switch (without router attached), the units will be on IP address range at 169.254.1.1 and subnet mask 255.255.0.0.
Set your computer's IP address as 169.254.X.X and subnet mask as 255.255.0.0.
A Windows 7 PC/Laptop is used as an example to configure a static IP address.
1.
Click Start.
2.
Choose Control Panel > Network and Internet > Network and Sharing Center > Change
Adapter Settings, right click Local Area Connection, and then choose Properties.
You can connect multiple HDM-C6MWIP-S and the HDM-C6MWIP-R H.264 decoder to build a modular IP matrix. With the
PC configurator, you can configure and manage this function. For more information, see the user guide of PC configurator.
Minimum System Requirements PC Software
Operating System: Microsoft® Windows® XP, Windows® Vista, Windows® 7 or Windows® 8
CPU: 1.5 GHz
Memory: 1 GB of RAM
HDD: 32 GB of available hard disk space
Network: 10/100 NIC
www.avenview.com
Bekijk gratis de handleiding van Avenview HDM-C6MWIP-R-V3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Avenview |
| Model | HDM-C6MWIP-R-V3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6577 MB |
