Handleiding
Je bekijkt pagina 15 van 16
15
User Manual
www.AvantcoRefrigeration.com
Refrigerated Prep Tables Refrigerated Prep Tables
Fan Blades & Motor
Interior
Cleaning the Condenser Coil
Cleaning the Condenser Coil Instructions
Maintenance
•
If necessary, clean the fan blades and motor with a soft cloth.
•
If it is necessary to wash the fan blades more thoroughly, cover the fan motor to prevent moisture
damage, then use a damp cloth to clean the fan blades.
•
Use warm water and a mild soap with a clean cloth to wipe down the interior of the unit.
•
DO NOT use steel wool, caustic soap, abrasive cleaners, or bleach that may damage the interior
finish.
•
Wash door gaskets on a regular basis, preferably weekly. Simply remove door gasket from the
frame of the door, soak in warm water and soap for thirty (30) minutes, dry with soft cloth,
and replace.
•
Check door gaskets for proper seal after they are replaced.
•
Periodically remove the shelves and pilasters from the unit and clean them with mild soap and
warm water. To remove the pilasters, first remove the shelves and shelf brackets. Then, simply lift
the pilaster up and out.
•
A dusty condenser may lead to high energy consumption, less cooling eectiveness, and
compressor damage.
•
For ecient operation, keep the condenser surface free of dust, dirt, and lint.
•
We recommend cleaning the condenser coil at least once per month.
•
The condenser coil is located at the bottom behind the panel.
1.
Disconnect the electrical power from the unit.
2.
Remove the front cover and base cover with a screwdriver.
3.
Using a soft brush and/or vacuum, remove the dirt, lint, etc. from the finned condenser coil in a
vertical direction.
4.
Clean the condenser with a commercial condenser coil cleaner, available from any
kitchen equipment retailer. Ex. Noble Chemical Tech Line Coil Cleaners (148TLECCCLNR,
148TLHDCCLNR, 148TLECOILDD, 148TLFMCCLNR, 147TLEVPCLNR, or 147TLHDCCLNR).
5.
After cleaning, straighten any bent condenser fins with a fin comb.
6.
When finished, be sure to reinstall the front cover and base cover.
7.
Reconnect the electrical power to the unit.
DISCONNECT POWER CORD BEFORE CLEANING ANY PARTS OF THE UNIT.
It is strongly recommended that any servicing of the unit be performed by an authorized service
technician.
Bekijk gratis de handleiding van Avantco APT-27M-HC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Avantco |
| Model | APT-27M-HC |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3365 MB |
