Handleiding
Je bekijkt pagina 8 van 12
User Manual
Heated Holding Cabinets
8
www.AvantcoEquipment.com
PROOFING INSTRUCTIONS
(177HP MODELS)
1. Set HEAT/PROOF switch to PROOF.
2. Set POWER switch to the ON position. The power indicator light will turn on.
3. Set TEMPERATURE control to 2.
4. Set HUMIDITY control to 9.
5. Preheat cabinet until desired temperature
and humidity is reached (typical heat-up time from 77°F
(25°C) ambient to 95°F (35°C) and 95% relative humidity is approximately 30 minutes).
6. Adjust HUMIDITY control to desired level (9 being the highest, 1 being the lowest, OFF being no heat
to the water).
NOTE: Use of a hygrometer is recommended for precision proofing applications. For proofing, trial
batches and altering control settings are recommended to dial in the unit to the exact requirements
based on the ambient temperature and conditions.
Operation-Function Settings
Heat/Proof Switch Heat Thermostat Proof Thermostat Function On or O
Heat
O O
Heating
O
O
Proofing
O
Heat Set O
Heating
On
On
Proofing
O
Heat Set Set
Heating
On
On
Proofing
O
Heat O Set
Heating
O
O
Proofing
O
Proof O O
Heating
O
O
Proofing
O
Proof Set O
Heating
On
O
Proofing
O
Proof Set Set
Heating
On
O
Proofing
On
Proof O Set
Heating
O
O
Proofing
On
With unit plugged into dedicated breaker and power switch ON (power light and digital thermometer readout
are ON), the following function settings are as follows:
Bekijk gratis de handleiding van Avantco 177HTIS1812, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Avantco |
| Model | 177HTIS1812 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 2017 MB |
