Handleiding
Je bekijkt pagina 10 van 12
User Manual
Heated Holding Cabinets
10
www.AvantcoEquipment.com
Cleaning
WARNING
• ALWAYS unplug the cabinet from the electrical outlet for safety purposes, minimizing the risk of
electrical shocks.
• DO NOT wash the cabinet with high-pressured water or a water jet.
• ALWAYS allow the unit to completely cool before cleaning. Not allowing the unit to cool causes
risk of burn injury from the cabinet surfaces.
• DO NOT spray or pour water into the heated control drawer module. Excess water may cause the
heated control drawer module to short circuit or cease working.
CLEANING THE CABINET INTERIOR & EXTERIOR (EXCLUDING DOOR PANEL)
1. Ensure the power cord is not plugged in and the cord is off the ground.
2. Open the door and remove the water pan.
3. Remove the heated control drawer module by lifting the front up enough to clear the detent, then pull
the module away from the cabinet with the power cord through the rear clearance hole.
4. Using a mild detergent and a clean cloth, wipe down all interior and exterior surfaces excluding the
polycarbonate door panel.
5. Using a clean cloth, wipe down all surfaces and then let air dry.
6. After air drying, replace the heated control drawer module by slipping the power cord through the
rear clearance hole and sliding the drawer module into the bottom of the unit until it sits on its detent.
PREFERRED CLEANING PRODUCT
Brand Item # Description
147STRIKEQT Strike All Purpose Ready-to-Use Cleaner/Degreaser
DOOR PANEL
1. Ensure the power cord is not plugged in and the cord is off the ground.
2. Using a cleaner recommended for polycarbonate plastics and a clean cloth, wipe down both sides of
the door panel.
NOTE: Use of synthetic cloths or cleaners not intended for polycarbonate plastics may scratch or dull
the door panel.
3. Isopropyl rubbing alcohol or a small amount of liquid dish detergent diluted with water may help
remove tough grease smudges, dirt, or fingerprints, as well as help make the panel antistatic and less
likely to attract dust.
4. Paste wax recommended for polycarbonate plastics and approved for food service equipment can be
used to help hide small scratches and return luster and clarity to the door panel, as well as help make
the panel antistatic and less likely to attract dust.
Bekijk gratis de handleiding van Avantco 177HPESS1836, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Avantco |
| Model | 177HPESS1836 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 2017 MB |
