Avantco 177CST39BK handleiding
Handleiding
Je bekijkt pagina 4 van 11
User Manual
4 www.AvantcoEquipment.com
Preparation, Operation, Cleaning &
Installation Without Clamp
Preparation
1. For models with a clamp, secure clamp assembly to counter or table.
2. Slide heat lamp onto clamp assembly and ghten thumb screw to secure heat lamp to clamp
assembly.
3. Posion heat lamp near the power outlet, at least 12" away from a back wall (side wall, warming
surface or other surface).
4. If warmer fails to work properly when rst operated contact Avantco customer service.
Installation Without Clamp
1. For models without a clamp, take the non-slip drill template that’s aached to the boom of the
lamp and follow steps 2-5.
2. Posion the non-slip drill template on the wood cung board (or another solid surface).
3. Using the non-slip drill template, mark where you want to drill your lamp and predrill your holes
using a 1/16” drill bit.
4. Line up the lamp boom with your non-slip drill template.
5. Keeping your non-slip drill template under the lamp boom, secure the lamp using the included
bolts (4) or 4 wood screws into the predrilled holes.
*NOTE: The non-slip drill template is an an-skid and
slip resistant feature that helps protect your table
surface and product.
BW
底座安装位置尺寸图
Bekijk gratis de handleiding van Avantco 177CST39BK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Avantco |
| Model | 177CST39BK |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2021 MB |
