Handleiding
Je bekijkt pagina 14 van 29
User Manual
Commercial Countertop Griddles, Charbroilers, and Ranges
14
www.AvantcoEquipment.com
Countertop Gas Griddle,
Thermostatic
1. Open the manual gas supply valve (which will release gas
into the product);
2. Immerse in alcohol the lighter (wick) that accompanies the
product and light it; Note: Make sure that the container where
the alcohol is located is away from the product and wick after
immersing.
3. Press lightly and rotate the handle to the pilot position.
4. Keep it pressed and take the igniter (wick) passing between the pilot flame ignition hole in the
product panel until it comes into contact with the pilot and ignites the flame;
5. Keep the knob pressed for 10 seconds after the pilot flame is lit and turn the knob
counterclockwise until the wished temperature (use the knob to adjust the temperature);
6. Make sure the burner is lit. If the burner does not light, repeat the procedure;
Countertop Gas Griddle, Manual
1. Open the manual gas supply valve (which will release gas into the product).
2. Immerse in alcohol the lighter (wick) that accompanies the product and light it;
Note: Make sure that the container where the alcohol is located is away from the product
and wick after immersing;
3. Take the igniter (bypass) past the ignition hole in the flame of the pilot on the product panel
until contact with the pilot burner and until the flame ignites, repeat this procedure on all pilots
(see following image); Note: The ignition order does not interfere with the use of the equipment;
4. Turn the knob corresponding to the burner you wish to operate counterclockwise (adjust the
flame through the knob);
5. Make sure the burner is lit. If the burner does not light,
repeat the procedure;
6. After lighting all burners, you can turn o the burners and
turn them back on simply by
turning the corresponding knobs; Note: The pilot burner
flame is factory set according to the gas for which the product
was originally manufactured. Always check through the hole
identified on the panel as PILOT, if the pilot burner flame is lit.
If it is not, perform the procedures described above again.
Bekijk gratis de handleiding van Avantco 177CAGR424, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Avantco |
| Model | 177CAGR424 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4773 MB |
