Audiotec Fischer AMI handleiding
Handleiding
Je bekijkt pagina 32 van 34
32
7. Technical data
AMI
Inputs 1 x Microphone input
1 x Line input
Microphone input specication
Frequency response 12 Hz - 44 kHz (+/-1 dB)
Dynamic range 95 dB (A-weighted)
Input sensitivity 5 - 200 mV
Phantom power Yes (24 Volts)
Line input specication
Frequency response 8 Hz - 44 kHz (+/-1 dB)
Dynamic range 101 dB (A-weighted)
Input sensitivity max. 1 V / max. 40 V
Input impedance 10 kOhms
Outputs 2 x Line output
1 x Optical output (SPDIF)
Line output specication
Frequency response 7 Hz - 44 kHz (+/-1 dB)
Dynamic range 100 dB (A-weighted)
Maximum output voltage 900 mV (RMS)
Minimum load 5 kOhms
Loopback function Yes
General specication
Audio sampling rate 96 kHz / 32 Bit
USB power consumption max. 250 mA
Supported operating systems Windows, macOS, iOS and Android
Beyerdynamic MM1 microphone
(Part of the AMI Tuning Kit)
Transducer principle Condenser (back-electret)
Operating principle Pressure receiver
Frequency response 20 – 20,000 Hz (50 – 16,000 Hz ± 1.5 dB), diuse-eld equalized
Polar pattern Omnidirectional
Sensitivity (0 dB = 1 V/Pa) 15 mV/Pa (= -36.5 dBV) ± 1 dB
Nominal impedance 160 Ω
Nominal load impedance ≥ 2.2 kΩ
Maximum SPL (Sound Pressure Level) 122 dBSPL at f = 1 kHz, k = 1%, RL = 2.2 kΩ
Signal-to-noise ratio (related to 1 Pa) > 57 dB
A-weighted equivalent noise level Approx. 26 dB(A)
Power supply 12 - 48 V phantom power
Current consumption Approx. 1.9 mA
Output Electronically balanced
DSP PC-Tool compatibility
Version DSP PC-Tool 6
DSP PC-Tool 5
DSP PC-Tool 4
Bekijk gratis de handleiding van Audiotec Fischer AMI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Audiotec Fischer |
| Model | AMI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7035 MB |
