AudioControl Maestro X9S handleiding
Handleiding
Je bekijkt pagina 33 van 52
33
X/XR Series Processors & Receivers
RS232 Serial Control
system to match the data communication speed and format of the Processor/
Receiver. If these settings are incorrect, the Processor/Receiver will not
respond to the commands.
Communication parameters:
Baud Rate:
Start Bit:
Data Bits:
Stop Bit:
Parity: None
Flow Control: None
Cable Wiring
The cable wiring to connect the Processor/Receiver to your control system
that you wire the Transmit Data output on the serial controller to the Receive
Data on the Processor/Receiver and vice versa on the Receive Data line on the
controller system. Connect the signal grounds on the control system and the
Pin 2 Receive Data (RXD)
Pin 3 Transmit Data (TXD)
Pin 5 Ground
To connect the Processor/Receiver to a standard PC serial COM port; wire the
cable in a ‘null modem’ arrangement using the appropriate serial cable.
Bekijk gratis de handleiding van AudioControl Maestro X9S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AudioControl |
| Model | Maestro X9S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8201 MB |