AudioControl Maestro X9S handleiding
Handleiding
Je bekijkt pagina 28 van 52
28
X/XR Series Processors & Receivers
Video Inputs
If desired, you can assign a video source to each of the “audio only” inputs.
The default for each of these settings is “None”. This is a great way to listen
to the ball game over the Internet Radio and watch it over your normal video
HDMI Settings
X/XR Series Processors and Receivers feature very powerful video processing.
Video settings should be selected carefully to optimize your video
performance.
Zone 1 OSD -
When On, any adjustments made on the unit (like volume, mute state
changes, sub trim level) will be shown on your display screen, as well as
on the unit’s front panel display.
When O, any adjustments will only be shown in the unit’s front panel
display. This leaves your screen clear from interruption.
Zone 1 Out
(Alt), or both.
Lipsync (Information Only) - When this feature is supported by the display
device, this setting displays how much lip sync is applied to HDMI Outputs.
HDMI Audio to TV - Use this to set audio to be sent to the TV.
HDMI Bypass & IP - Sets the state of IP control and HDMI bypass of the unit
while in Standby. When in Low Power mode, network or IP control and HDMI
when in standby and HDMI bypass is enabled.
HDMI Bypass Source -
CEC Control - Enables/disables CEC control.
eARC Control - Enables/disables automatic volume control from the display.
TV Audio - Enables/disables auto-switching to eARC audio from the display.
Power O Control - Enables/disables automatic power control from other CEC
devices.
Bekijk gratis de handleiding van AudioControl Maestro X9S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AudioControl |
| Model | Maestro X9S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8201 MB |