AudioControl Maestro X9S handleiding
Handleiding
Je bekijkt pagina 26 van 52
26
X/XR Series Processors & Receivers
Speaker Types
This series of menus allows you to select the types of speakers that you will be
connecting to the Processor/Receiver.
“Large”
kHz) audio signal. Use this setting when not using a subwoofer.
“Small” speaker is one that is not designed to reproduce deep bass
frequencies and is generally used with a subwoofer (i.e. Satellite speakers
crossovers independently for each speaker type when using the Small
to the subwoofer.
“Height 1, 2” selects the speaker types used for Dolby Atmos and
DTS:X.
“None” If you do not have a speaker connected to an output (i.e. No
Subwoofer or Back Speakers) then set that speaker size to “None”.
“Subwoofer” Selects whether a subwoofer is present in your system.
“Channel 13 & 14” Selects whether Front subs or Wide speakers are
present, options include Large, Small at various crossover frequencies.
“Channel 15 & 16” Selects between Rear Subs, Middle Heights or Center
Height or none are present.
Height Type - Sets whether Dolby Enabled or ceiling mounted.
Using Channels 6 + 7 for - If your main speaker system has no Surround Back
and right speakers.
Filter slope
Sub gain
Bekijk gratis de handleiding van AudioControl Maestro X9S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AudioControl |
| Model | Maestro X9S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8201 MB |