AudioControl Maestro X9S handleiding
Handleiding
Je bekijkt pagina 22 van 52
22
X/XR Series Processors & Receivers
Input Conguration
Each input has individual audio and video settings that can be adjusted
Input -
Name -
and the OSD. The name can be changed, and this is very useful when
more than one source unit has similar functions (for example, two Satellite
Lip Sync - Many video processors and line multipliers cause a slight delay
between the sound and the video picture. Highly compressed video signals
this problem. The Lip Sync setting delays the audio a small amount to allow
the video image to catch up. If this is an audio only input - like Aux, then
LipSync is grayed out.
Mode - Sets the initial audio decode mode for stereo sources on this input.
Last Mode - recalls the last used setting for stereo sources. See section
MCH. Mode - Sets the initial audio decode mode for multi-channel digital
sources on this input.
Last Mode - recalls the last used setting for multi-channel sources. See
Bass and Treble - Changes the bass and treble response for all speakers when
using this input. Very useful when you have a source unit that has reduced
Room EQ -
Downloaded into one of the three slots available, this can be selected.
Not Calculated -
selected.
Project Name - Dirac Live Room EQ is applied to the current source and
will display the name of the project from the Dirac Live application.
O - Dirac Live Room EQ is not applied to the current source.
Input Trim - Selects the maximum analog signal for this input before clipping.
This setting should match the audio output of your source units with the
Bekijk gratis de handleiding van AudioControl Maestro X9S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AudioControl |
| Model | Maestro X9S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8201 MB |