Audient EVO SP8 handleiding

Handleiding

123456789101112131415161718192021222324252627/ 27

Afdrukken

Je bekijkt pagina 18 van 27

Key:

Optical TOSlink Cable

EVO EXPANDED SYSTEM EVO EXPANDED SYSTEM

If your host interface doesn’t have a Word Clock Output, such as an Audient

iD14, you can use the SP8 as the primary clock.

Connect an TOSlink cable from the EVO SP8’s Optical Output to the

Optical Input of your host interface.

Using the Setup Menu of the SP8, set the clock source to ‘Internal’.

Check that your host interface is set up to sync to the incoming ADAT

signal. On an Audient iD interface for example, this would be done in

the System Panel by setting the Clock Source to ‘DIGI’.

Finally, check that both devices are using the same sample rate so

they can correctly sync.

EVO SP8 as the Primary Clock

1.

2.

3.

4.

USING EVO SP8 WITH AN

ADAT CAPABLE INTERFACE

123456789101112131415161718192021222324252627/ 27

Bekijk gratis de handleiding van Audient EVO SP8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd