Audibax M88 DSP handleiding
Handleiding
Je bekijkt pagina 30 van 106
M88 DSP / M88 DSP Dante
www.audibax.com 28
High & Low Pass Filter
Each output channel provides high- and low-pass modules which consist of high- and
low-pass filters. Each filter has four kinds of parameters as follows:
- Frequency: The cutoff frequency of filters. The cutoff frequency of Bessel and
Butterworth is defined at -3 dB, and the cutoff frequency of Linkwitz-riley is defined at
-6dB.
- Gain: Gain setting influences the promotion and attenuation of full band.
- Type: There are three types of filters including Bessel, Butterworth and Linkwitz-riley.
Butterworth has the flattest passband.
- Slope: Refers to attenuation values of the transition zone of the filters. There are a total of
8 attenuation values, including 6, 12, 18, 24, 30, 36, 42 and 48 dB/Oct. For example, 24
dB/Oct indicates that the attenuation rate is 24 dB for each octave difference in frequency
in the transition zone.
Users may click bottom activate button to activate high- or low-pass module.
Delay
Enable Button: Activate the designated delay module in the
modules and insert it into the audio signal path to increase the fixed
delay time for the signals.
Millisecond: Set the delay time. The value ranges from 1 to 1,200
milliseconds. Both meters and feet are equivalent units of
milliseconds.
Bekijk gratis de handleiding van Audibax M88 DSP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Audibax |
| Model | M88 DSP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13294 MB |
