Audibax M88 DSP Dante handleiding
Handleiding
Je bekijkt pagina 12 van 106
M88 DSP / M88 DSP Dante
www.audibax.com 10
SOFTWARE
Software installation
A Windows PC with a 1 GHz or higher processor and:
- Windows 7 or later.
- 1 GB of free storage space.
- Minimum resolution of 1027x768
- 24-bit color or higher.
- 2 GB or more of memory.
- Network interface (Ethernet).
- CAT5 cable or existing Ethernet network
The audio processor has built-in control software, which can be quickly downloaded by
accessing the IP address of the audio processor. Enter the IP address of the device in the
address bar of the browser to access the audio processor, find the download link, and
download the installation software to the local to complete the installation. The factory
default IP address of the device is: 169.254.10.227
Subnet mask: 255.255.0.0, first add the address of this network segment on the computer
so that the device can access normally. Once the device starts, enter
"http://169.254.10.227/".
Before installing the PC software, make sure that a newer version of Microsoft .Net
Framework has been installed on the PC.
Installing NexusX 3.0
Run NexusX 3.0 icon once installed
Select the unit model to operate, in this case M88
Bekijk gratis de handleiding van Audibax M88 DSP Dante, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Audibax |
| Model | M88 DSP Dante |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13294 MB |
