Handleiding
Je bekijkt pagina 13 van 92
13
AEC SERIES COMBI OVEN
2.2 Handling and Correct Installation Position
Wearing protective clothing, use a forklift to carry the appliance to the room where it will
be installed: for correct transportation, insert the forks in the right or left side and NEVER
in the front or back.
The positioning area must:
1. Be well-ventilated and protected from the weather.
2. Have a smooth, perfectly level oor which can bear the weight of the appliance at full load.
3. Have a maximum humidity of 70%.
4. Have a temperature above 41°F.
5. Comply with current safety and system regulations.
6. Be designated for food preparation.
Technical Requirements:
1. Install the appliance under a hood with adequate power.
2. Have access to water and electrical connections.
3. Maintain a clearance space of at least 6 inches on each side of the appliance.
4. Leave at least 28 inches at the back from fryers or other hot equipment.
Do not place the equipment close to materials or containers made of ammable
material (e.g. dividing walls, gas cylinders, ...) due to the risk of re. It is advisable
to coat any walls with non-ammable thermal material.
For safety reasons, do not position the highest tray higher than 63 inches. If the
need arises, the “risk of burns” sticker must be applied at the stated height.
Bekijk gratis de handleiding van Atosa AEC-0621E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atosa |
| Model | AEC-0621E |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 7705 MB |
