Atlona AT-VGW-250 Handleiding (171 Pagina's)

Handleiding

Velocity

66

Device Drivers

Protocol Termination - Drop down selection that applies the same termination to all commands: CR, LF,

CRLF, or none.

Clear Commands - Press this button to remove all the current commands from the page.

Copy from TCP - Copies the command from TCP/IP over to RS-232.

Copy from RS - Copies the command from RS-232 over to TCP/IP.

Driver Editor - This button opens a new window to allow for programming a control driver.

Checksum Algorithm - Use this slider to enable checksum on commands. New options will appear.

NOTE: This driver editor is for those with programming experience.

Algorithm to Use - Use the drop down menu to select the type of checksum algorithm the command.

Byte Size - Select the size in bytes for the command to send.

Header oset - Set the amount of the command that is not part of the checksum. Default 0 will include

the whole command.

For checksum to work, it must have a variable set to the command and checksum set in properties of the command.

• Type the command in hex value. Place %v where the checksum will replace the hex value.

• Select the Properties icon. A new window will pop up.

• Select the checkbox for Is Checksum.

• Select Save Changes and the command will be ready for use with checksum.

Bekijk gratis de handleiding van Atlona AT-VGW-250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Merk	Atlona
Model	AT-VGW-250
Categorie	Niet gecategoriseerd
Taal	Nederlands
Grootte	28056 MB

Caratteristiche Prodotto

Certificering	CE, FCC
Ethernet LAN, data-overdrachtsnelheden	10,100,1000 Mbit/s
Netwerkstandaard	IEEE 802.1x
Temperatuur bij opslag	-20 - 60 °C
Output current	3.42 A