Atlona AT-VGW-250 handleiding
Handleiding
Je bekijkt pagina 28 van 171
Velocity
28
System Settings
• 802.1x Security - Enable or disable this by selecting
the slider. Enabling will allow the Velocity Gateway to
be authenticated and authorized when connected to a
network using 802.1x access control.
Networks
1. Select Networks from the top navigation inside of the Server Settings.
NOTE: By default, Ethernet Port 1 is set to Static IP (192.168.41.68) and Ethernet Port 2 is set to DHCP. When
using a VGW-HW.
• 802.1x Security - Enable or disable this by selecting
the slider. Enabling will allow the Velocity Gateway to
be authenticated and authorized when connected to a
network using 802.1x access control.
Network 1 - Corresponds with Ethernet Port 1 of the
AT-VGW-HW and can be set between static IP, DHCP,
and DHCP server. If set as a DHCP server, a range of IP
addresses must be set so it can assign IP addresses for
anything else connected to the network. FTP slider is used
with updating the Velocity Panels and more information
can be found within the VTP/VSP installation guides.
Network 2 - This option will only appear when a VGW-HW
is being used. This section corresponds with Ethernet Port
2 of the AT-VGW and can be set between static IP and
DHCP.
Network (AT-VDM and AT-VGW-SW) - The network
options will have dierent selections on soft gateways.
By default the soft gateway will be set to DHCP. Select the
slider to set it to Static. For static IP the IP and gateway
will need to be set.
A custom DNS server can be set by selecting the slider
and typing in the DNS address.
FTP Enabled slider can be used to store rmware for VTP
updating. To enable it, select the slider and it will turn
green when enabled.
Soft gateways do not support 802.1x at this time.
Bekijk gratis de handleiding van Atlona AT-VGW-250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-VGW-250 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 28056 MB |
Caratteristiche Prodotto
| Certificering | CE, FCC |
| Ethernet LAN, data-overdrachtsnelheden | 10,100,1000 Mbit/s |
| Netwerkstandaard | IEEE 802.1x |
| Temperatuur bij opslag | -20 - 60 °C |
| Output current | 3.42 A |
