Atlona AT-USB-EX350-KIT handleiding
Handleiding
Je bekijkt pagina 32 van 56
AT-USB-EX350-KIT
32
Device Operation
RS-232 Control
This section allows you to congure RS-232 parameters for controlling remote third-party devices through the
RS-232 port. These settings also enable the port to function as a TCP proxy.
RS-232 Control Settings
1. Make sure that the third-party device is connected to the RS-232 port on the AT-USB-EX350-DV.
2. Log in to the web server.
3. Click Control in the side menu bar. The RS-232 Port eld will show the model of the connected device endpoint.
4. Click the Baud Rate drop down list to select the required baud rate. Available options are 9600, 19200, 38400,
57600, and 115200.
5. Click the Parity, Data Bits, and Stop Bit drop-down lists to set the required value. In most cases, these values
will be NONE, 8, and 1, respectively.
6. To test the serial port settings, a serial command can be sent using the the web pages. Enter the command in
the Command eld. The command can be in either ASCII or hexadecimal format. If the command is entered in
hexadecimal format, click the HEX checkbox.
An example of an ASCII string might be: PWON.
A command in hexadecimal format might be:
\xBE\xEF\x03\x06\x00\xBA\xD2\x01\x00\x00\x60\x01\x00\x0D
7. Click the SEND button to verify that the command works properly.
Bekijk gratis de handleiding van Atlona AT-USB-EX350-KIT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-USB-EX350-KIT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6583 MB |
