Atlona AT-UHD-HDVS-300-KIT handleiding
Handleiding
Je bekijkt pagina 39 van 50
AT-UHD-HDVS-300-KIT
39
The Web GUI
Setup page
Power
Click this drop-down list and select the protocol used to send the power command.
Volume/Mute
Click this drop-down list and select the protocol used to send volume and mute commands.
Retry Timeout
Enter the time interval before the command is resent, if a failure should occur.
Lock Power Button
Allows the POWER button on the front panel to be locked, preventing accidental operation when the product is in
use. Click this check box to enable this feature.
Setting Description
Command None, AV On/O Display is always ON, but the source can be powered-on or powered-o.
Command On/O, AV On/O Both the source and display can be powered-on or powered-o.
Command On/O, AV No Change Display can be powered-on or powered-o, but the source is always on.
Display Switch Mode
Click this drop-down list to set the display switching mode.
Note that Display Switch Mode can only be congured if RS-232 Control is set to Control. Refer to the Control
page (page 34) for more information. If RS-232 Control is set to Pass-Thru, when assigning the Display Switch
Mode, then an error message will be displayed.
Bekijk gratis de handleiding van Atlona AT-UHD-HDVS-300-KIT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-UHD-HDVS-300-KIT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6185 MB |
