Atlona AT-UHD-CLSO-840 handleiding
Handleiding
Je bekijkt pagina 67 van 76
AT-UHD-CLSO-840
67
Appendix
Updating the Firmware
The AT-UHD-CLSO-840 is updated through the web GUI.
Required items:
• New rmware - Downloaded from atlona.com
• IP address of the AT-UHD-CLSO-840
• Computer on the same network as the AT-UHD-CLSO-840
• Username and password to access the web GUI
1. Verify that an Ethernet cable is connected between the AT-UHD-CLSO-840 and the network. The computer used
to access the web GUI must be on the same network as the AT-UHD-CLSO-840.
2. Type the IP address of the AT-UHD-CLSO-840 into a web browser, as shown in the example below.
3. The login screen will be displayed. Login using the username and password. The default login credentials are:
Username: root
Password: Atlona
4. Click Status on the left side of the screen.
Bekijk gratis de handleiding van Atlona AT-UHD-CLSO-840, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-UHD-CLSO-840 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11442 MB |
