Atlona AT-UHD-CLSO-840 handleiding
Handleiding
Je bekijkt pagina 29 van 76
AT-UHD-CLSO-840
29
Audio from digital inputs (HDMI IN 1 - 5, HDBaseT 6 - 8) or analog inputs (AUDIO IN 1 - 4) can be routed to any
of the digital outputs (HDMI IN 1 - 2, HDBaseT 3 - 4). In addition, any one of the analog audio inputs can be used
to replace the digital audio from the source, if desired. The resulting audio operation is routed to the desired digital
output.
Analog or Digital Audio to Digital Outputs
1. Login to the web GUI. Refer to Introduction to the Web GUI (page 55) for more information.
2. Click I/O, under the Conguration section, in the menu bar on the left side of the screen.
3. Under the Input/Output Selection section, locate the desired output which will receive the A/V signal. In this
example, a separate analog audio source on AUDIO IN 1, will replace the digital audio on the HDBaseT IN 7
port. The resulting audio operation will be routed to HDBaseT OUT 3.
4. Click the HDMI Audio drop-down list, next to Video Out 3: Output_3, and select Analog.
Basic Operation
HDMI IN HDBaseT IN
R L
1
R L
2
76 8
21 3 4
4321 5
R L
3
R L
4
R L
1
R L
2
R L
3
R L
4
HDBaseT OUT LAN
ON
OFF
PWR 100-240VAC 50/60Hz
RS-232
HDMI OUT
AUDIO IN AUDIO OUT
+ +
+ +
+ ++ + + +
+ +
+ +
+ +
RX TX
AT-UHD-CLSO-840
FCN CANCEL EDID
INFO
POWER ENTER 5 6 7 8
1 2 3 4
Digital Inputs
Analog Audio Inputs
Digital Outputs
Bekijk gratis de handleiding van Atlona AT-UHD-CLSO-840, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-UHD-CLSO-840 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11442 MB |
