Atlona AT-UHD-CLSO-840 handleiding
Handleiding
Je bekijkt pagina 15 van 76
AT-UHD-CLSO-840
15
Installation
Using the web GUI
1. Login to the web GUI. Refer to Introduction to the Web GUI (page 55) for more information.
2. Click Network, under the Settings section in the menu bar on the left side of the screen.
• Click ON, next to DHCP, to set the matrix to DHCP mode. If set to DHCP mode, the IP Address, Subnet,
and Gateway elds will automatically be assigned by the DHCP server (if one exists). If no DHCP server
can be found, the matrix will be assigned the static IP address of 192.168.0.150 with a subnet mask of
255.255.255.0.
• Click OFF to set the matrix to static IP mode. When set to static IP mode, enter the required information in
the IP Address, Subnet, and Gateway elds, as shown in the illustration below.
3. Click the Save button to commit changes.
Bekijk gratis de handleiding van Atlona AT-UHD-CLSO-840, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-UHD-CLSO-840 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11442 MB |
