Atlona AT-UHD-CLSO-840 handleiding
Handleiding
Je bekijkt pagina 13 van 76
AT-UHD-CLSO-840
13
Connection Instructions
Installation
1. Connect up to ve HD/UHD sources to the HDMI IN (1 - 5) ports.
2. Connect up to three PoE-compatible transmitters (e.g. AT-HDVS-210H-TX-WP) to the HDBaseT IN (6 - 8) ports
using Ethernet cables.
3. Connect up to two UHD/HD displays to the HDMI OUT (1 - 2) ports using HDMI cables.
4. Connect up to two PoE-compatible receivers (e.g. AT-UHD-EX-100CE-RX, AT-HDVS-200-TX, AT-HDVS-SC-RX)
to the HDBaseT OUT (3 - 4) ports using Ethernet cables.
5. Connect an Ethernet cable from the LAN port to a Local Area Network (LAN). This step is required in order to
access the Web GUI and/or use the matrix for IP control.
7. Connect up to four analog audio sources to the AUDIO IN (1 - 4) ports using the included 5-pin captive screw
blocks. Refer to Audio Routing (page 25) for more information.
8. Connect up to four audio output devices (e.g. AT-GAIN-60) to the AUDIO OUT (1 - 4) ports using the included
5-pin captive screw blocks. Refer to Audio Routing (page 25) for more information.
HDMI IN HDBaseT IN
R L
1
R L
2
76 8
21 3 4
4321 5
R L
3
R L
4
R L
1
R L
2
R L
3
R L
4
HDBaseT OUT LAN
ON
OFF
PWR 100-240VAC 50/60Hz
RS-232
HDMI OUT
AUDIO IN AUDIO OUT
+ +
+ +
+ ++ + + +
+ +
+ +
+ +
RX TX
AT-UHD-CLSO-840
FCN CANCEL EDID
INFO
POWER ENTER 5 6 7 8
1 2 3 4
OPTIONAL
6. Connect the included power cable from the PWR 100-240VAC 50/60Hz power receptacle to an available AC
power outlet.
Bekijk gratis de handleiding van Atlona AT-UHD-CLSO-840, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-UHD-CLSO-840 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11442 MB |
