Atlona AT-UHD-CAT-2 handleiding
Handleiding
Je bekijkt pagina 36 van 45
AT-UHD-CAT-2
36
The Web Server
Power
Under normal operation conditions, this toggle is set to ON. Click this toggle to OFF, to place the AT-UHD-CAT-2 in
standby mode. The PWOFF and PWON commands can also be used to control the power state.
Lock
Click to lock or unlock the buttons on the front panel. Locking the front panel buttons is useful in preventing
accidental button activation within rack environments.
Power button mode
Click this drop-down list to select the desired function of the power button. Refer to Power Button Modes (page
25) for more information.
Setting Description
DA standby Pressing the POWER button will toggle the AT-UHD-CAT-2 between standby mode and
normal operating mode.
CEC* When a sink device (display) is connected to the AT-UHD-CAT-2, pressing the POWER
button will toggle the power state of the display using the CEC protocol. The power
state of the AT-UHD-CAT-2 is unaected. Power-on and power-o commands are sent
over both the HDBaseT OUT and HDMI OUT ports
Both Pressing the POWER button will toggle the power state of both the AT-UHD-CAT-2 and
any sink devices that are connected to the AT-UHD-CAT-2, using the CEC protocol.
Power-on and power-o commands are sent over both the HDBaseT OUT and HDMI
OUT ports.
Reset to Default
Click the Factory Default button to set the AT-UHD-CAT-2 to factory-default settings.
Firmware Update
Click the Choose File button to select the rmware le, when upgrading the rmware on the AT-UHD-CAT-2.
Once the rmware le is selected, click the Update button. Refer to Updating the MCU Firmware (page 37) and
Updating the Valens Firmware (page 39) for more information.
ON / OFF
Click these buttons to test CEC control between the AT-UHD-CAT-2 and the connected sink device. Click the ON
button to power-on the device and OFF to power-o the device. Refer to Power Button Modes (page 25) for more
information.
*Consumer Electronics Control (CEC): Atlona has conrmed proper CEC functionality with several current models of Samsung, Panasonic, and
Sony displays. However, it is not guaranteed that CEC will work with all displays. Many manufacturers do not support the CEC “o” command,
and older displays use proprietary commands. Atlona only supports displays that use the CEC command structure dened in HDMI 1.2a. It is
recommended that dealers request an evaluation product from Atlona, before designing a system using the CEC protocol. If this is not possible,
then other control methods will need to be considered, in order to control displays using Atlona products.
Bekijk gratis de handleiding van Atlona AT-UHD-CAT-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-UHD-CAT-2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5847 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 1660 g |
| Breedte | 44 mm |
| Diepte | 254 mm |
| Hoogte | 219.5 mm |
