Atlona AT-OMNI-311 handleiding
Handleiding
Je bekijkt pagina 21 van 23
AT-OMNI-311
21
Basic Operation
DHCP Reset
Use the following instructions to reset the device to DHCP mode. Resetting to DHCP mode will not remove any
pairings and if the device is already paired, it will remain paired.
1. Disconnect power from the unit.
2. Reconnect power to the unit, and within 5 seconds, press and hold the PAIRING button.
3. Continue holding the PAIRING button for 15 seconds, then release.
4. Power-cycle the unit once again, by disconnecting and reconnecting the power. Let the unit boot up normally.
5. The unit is now in DHCP mode and will automatically be assigned an IP address by the DHCP server, if one is
present on the network.
PWR
LINK
SIGNAL
HOST
OMNISTREAM
TM
UTILITY PAIRING LANHOST
AT-OMNI-311
PAIRING button
Bekijk gratis de handleiding van Atlona AT-OMNI-311, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-OMNI-311 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2849 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 230 g |
| Breedte | 99.5 mm |
| Diepte | 75.45 mm |
| Hoogte | 26.4 mm |
