Atlona AT-OMNI-232 handleiding
Handleiding
Je bekijkt pagina 15 van 26
AT-OMNI-232
15
If no OMNI 232 is found:
• Make sure that both OMNI-232 and AMS are on the same network.
• Wait 60 seconds for OMNI-232 to be auto discovered.
• If the OMNI-232 is not discovered even after verifying network and waiting 60 seconds, follow the next steps:
a. Remove any network restrictions that may be in place.
b. In AMS, click Start > Add Device > Auto > Stop mDNS Discovery. This feature is enabled by default.
c. A message box will display when complete. Click the OK button to dismiss the message box.
d. Restart the mDNS listener by clicking Start > Add Device > Auto > Start mDNS Discovery.
e. After the mDNS listener is enabled, click the OK button to dismiss the message box.
f. The OMNI-232 should now be listed under the Domain View pane.
AMS
IMPORTANT: OmniStream uses mDNS as the discovery mechanism. In order for mDNS to function
properly, there must not be restrictions applied to the network. VPN can be used to connect to a
computer that is running AMS, on the same network. However, VPN cannot be used when AMS is
running on the local machine.
If OMNI-232 is found:
The System Info page will display basic information for the OMNI-232.
Model Number
Will display the unit’s SKU, it will always say AT-OMNI-232
Version
Will display the rmware version. This will help ensure the unit is up to date
MAC Address
This identies the unit
System Info
Bekijk gratis de handleiding van Atlona AT-OMNI-232, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-OMNI-232 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2945 MB |
