Atlona AT-OMNI-122 handleiding

129 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 28 van 129
AT-OMNI-121 / AT-OMNI-122
28
Basic Conguration Tutorial
Conguring Inputs
The Input page is used to verify that the encoder recognizes the source device. This page is also used to set the
EDID, HDCP version, and provides detailed information about the source signal. The following procedure should be
performed on both AT-OMNI-111 encoders.
1. Click the Input menu.
2. Since a source has been connected to the HDMI IN port, the Cable present indicator within the Input 1 window
group is green, as shown below. This indicates that an active source is connected to the HDMI port.
If these indicators are red, check that each source is connected to an HDMI IN port. A red indicator may also
describe faulty HDMI cables. If the sources are connected, then try dierent HDMI cables. If the HDMI cable
integrity has been veried, then make sure that the output resolution of the source is at least 720p.
3. Click the EDID drop-down list to select an EDID. For now, leave this setting at Default HDR MCH. This EDID
provides general compatibility with most displays.
4. The HDCP > Encrypted indicator will be green if
HDCP content is present. In this example, the source
connected to HDMI IN 1 is not transmitting HDCP
content. Therefore, the indicator is red.
5. Click the HDCP > Version drop-down list to restrict
HDCP to a particular version. By default, this is set
to 2.2 and this setting should be used for most
applications.
1
2
3
4
5
TIP: If no signal is being received on the encoder, then it’s always a good practice to check the
Input screen on the encoder when performing additional troubleshooting.

Bekijk gratis de handleiding van Atlona AT-OMNI-122, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAtlona
ModelAT-OMNI-122
CategorieNiet gecategoriseerd
TaalNederlands
Grootte18571 MB

Caratteristiche Prodotto

Kleur van het productZwart
Gewicht700 g
Breedte208 mm
Diepte112 mm
Hoogte34 mm