Atlona AT-OMNI-111 handleiding
Handleiding
Je bekijkt pagina 49 van 153
Using OmniStream
™
with Velocity
™
Device Manager
49
Device Operation
2. Click the INPUT menu.
3. Under the HDMI Input 1 window group, select Default HDR MCH from the EDID drop-down list.
4. Click the Supported Version drop-down list and select 2.2. Click the SAVE button, under the HDMI Input 1
window group, to commit changes.
5. Under the Encoder 1 window group, click the Input drop-down list and select HDMI Input 1.
6. Set the Max Bit Rate eld to 450.
7. Click the Scaler drop-down list and select 1920x1080.
8. Click the Thumbnail > Enable toggle switch to enable thumbnails of the source. This will verify that the input
source is congured correctly and will provide a visual reference for the encoder stream. Thumbnails are
updated every 2 seconds.
1. Click DEVICE INFO in the menu bar, then click the System Mode drop-down list and select VCx. Click the
SAVE button, in the lower-right corner of the screen, to commit changes.
Dual-Streaming Encoder Conguration
IMPORTANT: VCx must be enabled in order to use the Multiview feature.
NOTE: Thumnails can also be accessed at: http://<encoder-ip-address>/thumbnail/
thumbnail1.jpg. For dual-channel encoders, the secondary thumbail can be accessed at:
http://<encoder-ip-address>/thumbnail/thumbnail2.jpg.
9. Click the SAVE button, under the Encoder 1 window group, to commit changes.
10. Under the Encoder 2 window group, select HDMI Input 1 from the Input drop-down list.
11. Set the Max bit rate eld to 150.
12. Click the Scaler drop-down list and select 1280x720.
13. Click the SAVE button, under the Encoder 2 window group, to commit changes.
14. Click SESSION in the menu bar and congure each video stream using the information in the table bellow.
Audio streams will not be congured for this tutorial.
Encoder #1
Stream Interface Encoder Destination
Multicast/Unicast Address
Destination UDP Port
Stream 1
eth1 Encoder 1 226.0.0.1 1000
Stream 2
eth1 Encoder 2 226.0.0.2 1000
15. Click the SAVE button, under both Stream 1 and Stream 2 window groups, to commit changes.
This encoder is used with the HD camera and will be congured to dual-stream 1080p and 720p.
Bekijk gratis de handleiding van Atlona AT-OMNI-111, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-OMNI-111 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 21597 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Breedte | 208 mm |
| Diepte | 112 mm |
| Hoogte | 34 mm |
| LED-indicatoren | Ja |
