Atlona AT-OMNI-111 handleiding
Handleiding
Je bekijkt pagina 39 van 153
Using OmniStream
™
with Velocity
™
Device Manager
39
Device Operation
Option 2: Dening Commands on the Encoder
1. Login to the encoder and click the SERIAL menu. For each of the available commands, click the Interpret on
drop-down list and select decoder.
The available commands are: Display On, Display O, Volume Up, and Volume Down.
NOTE: Setting the Interpret on drop-down list to encoder implies that commands are dened/
stored on the encoder. If set to decoder, commands are dened/stored on the decoder.
2. Enter the command data in either ASCII or hexadecimal format using the ASCII or HEX elds.
3. Click the SAVE button.
1
2
2
3
4. Click the SESSION menu. Under the desired Stream, locate the Control/Serial section, click the Source drop-
down list, and select Commands.
5. Click the Enable Aux toggle switch to display the additional elds.
6. Enter the destination IP address and UDP port, of the decoder, in the Destination Multicast/Unicast Address
and Destination UDP Port elds, respectively. A multicast address can also be entered in the Destination
Multicast/Unicast IP Address eld.
7. Click the SAVE button.
4
5
6
6
7
Bekijk gratis de handleiding van Atlona AT-OMNI-111, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-OMNI-111 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 21597 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Breedte | 208 mm |
| Diepte | 112 mm |
| Hoogte | 34 mm |
| LED-indicatoren | Ja |
