Atlona AT-OME-TX21-WP-E handleiding

46 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 8 van 46
AT-OME-TX21-WP-E
8
The Atlona AT-OME-TX21-WP-E is a 2×1 switcher and HDBaseT transmitter with HDMI and USB-C inputs.
It is designed for commercial installations in Europe. The OME-TX21-WP-E includes interchangeable EU and
UK faceplates and brackets. The USB-C input is ideal for AV interfacing with newer Mac®, Chromebook™, and
Windows®PCs, as well as smartphones and tablets. Video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma
subsampling, plus embedded audio and control can be transmitted up to 330 feet (100 meters). The OME-TX21-
WP-E is HDCP 2.2 compliant. It is designed for use with Omega™ Series receivers and switchers, select HDVS
Series receivers, the AT-UHD-EX-100CE-RX-PSE receiver, and other Atlona switchers with HDBaseT inputs. This
transmitter can serve as an integral component of a fully automated AV system, with the convenience of automatic
input selection and display control. It is remotely powered by Atlona HDBaseT-equipped devices through Power over
Ethernet (PoE).
Introduction
Features
Package Contents
Compact enclosure for EU and UK wallplate openings – interchangeable EU and UK trim kits
2×1 HDBaseT switcher with HDMI and USB-C inputs
HDBaseT transmitter for AV, power, and control up to 330 feet (100 meters)
HDCP 2.2 compliant
Remotely powered via PoE (Power over Ethernet)
Automatic input selection and automatic display control
TCP/IP and RS-232 control of switcher
1 x AT-OME-TX21-WP-E w/EU faceplate installed
1 x AT-OME-TX21-WP-UK faceplate
2 x M3.5 x 40mm screws
1 x 3-pin captive screw connector
1 x USB-C cable
1 x Installation Guide

Bekijk gratis de handleiding van Atlona AT-OME-TX21-WP-E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAtlona
ModelAT-OME-TX21-WP-E
CategorieNiet gecategoriseerd
TaalNederlands
Grootte5716 MB