Atlona AT-OCS-900N handleiding
Handleiding
Je bekijkt pagina 8 van 61
AT-OCS-900N
8
Connection Instructions
Installation
3. In a pre-drilled 2.5” hole, fold the wing clips towards the center of the AT-OCS-900N. The recommended
mounting hold diameter is 2.5” and should not exceed a diameter of 2.90”. Refer to Figure 1.1 for dimensions of
the AT-OCS-900N.
4. Insert the device into the ceiling tile and release clips. The wing clips will return to the down position, securing
the unit in place.
C E I L I N G
C E I L I N G
Energy Mgmt Equip
Motion Sensor - Low Bay, White
Connect to LPS supply only
Input: 57V, 1.4W, Max Amb: 50° C
S/N: 210226-IDLM-XX1
MAC: 68-27-19-D2_2E-CE
AT-OCS-900N 210226-1
C E I L I N G
1. Determine the coverage area required. Refer to Coverage Pattern Diagrams (page 9) for more information.
2. Connect an Ethernet cable from the LAN port to the Local Area Network.
Figure 1.1
IMPORTANT: This product is designed to be installed by instructed or skilled person(s) only.
Also, do not touch or apply pressure to the IR sensor. Doing so may damage or break the IR
sensor.
2
3 3
4 4
Bekijk gratis de handleiding van Atlona AT-OCS-900N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-OCS-900N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7813 MB |
Caratteristiche Prodotto
| Gewicht | 60 g |
| Breedte | 74 mm |
| Diepte | 74 mm |
| Hoogte | 54 mm |
| LED-indicatoren | Ja |
