Atlona AT-HDVS-200-TX-WP handleiding
Handleiding
Je bekijkt pagina 14 van 41
AT-HDVS-200-TX-WP / AT-HDVS-200-TX-WP-BLK
14
The AT-HDVS-200-TX-WP includes a built-in web GUI. Atlona recommends that the web GUI be used to set up the
AT-HDVS-200-TX-WP, as it provides intuitive management of all features.
The AT-HDVS-200-TX-WP is shipped with DHCP enabled. Once connected to a network, the DHCP server will
automatically assign an IP address to the unit. Use an IP scanner to determine the IP address of the AT-HDVS-200-
TX-WP. If a static IP address is desired, refer to IP Conguration (page 11). The default static IP address of the
AT-HDVS-200-TX-WP is 192.168.1.254.
Introduction to the Web GUI
1. Launch a web browser.
2. Use one of the following methods to access the IP address of the AT-HDVS-200-TX-WP:
a. Login to the web GUI of the receiver unit that is connected to the AT-HDVS-200-TX-WP. Once logged in,
click the link for the AT-HDVS-200-TX-WP, as shown:
b. Use an IP scanner to locate the IP address of the AT-HDVS-200-TX-WP on the network. The MAC address,
on the back of the unit, can be used to identify the unit with the IP address.
3. The Login page for the receiver will be displayed.
The Web GUI
NOTE: The web GUI can only be accessed if the AT-HDVS-200-TX-WP is connected to a compatible
PoE receiver unit, such as the AT-HDVS-200-RX, using the HDBaseT port. The receiver must be
connected to the network.
Bekijk gratis de handleiding van Atlona AT-HDVS-200-TX-WP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-HDVS-200-TX-WP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4747 MB |
Caratteristiche Prodotto
| Gewicht | 230 g |
| Soort | AV-zender |
| Kleur | Ja |
| Connectiviteitstechnologie | Bedraad |
| Ondersteunde video-modi | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160p |
