Atlona AT-HDR-EX-100CEA-TX handleiding
Handleiding
Je bekijkt pagina 8 van 9
8
Installation Guide
AT-HDR-EX-100CEA-TX
Updating Firmware (manually)
1. Download the rmware .zip le from the rmware tab located at https://atlona.com/at-hdr-ex-
100cea-tx.
2. Unzip the .bin le to an easy to locate area of the local PC.
3. Set the Utility dial on the front of the unit to mode 2.
4. Connect the unit’s Utility mini USB port to a PC using a mini USB to USB A cable.
5. The PC should automatically detect the 100CEA and display the autorun options.
6. Select the view les in folder option. A new window will open.
7. If there are any les inside the folder, delete them, otherwise drag and drop the .bin le into
the folder. While the rmware loads to the unit, the green power LED on the front panel will
ash.
8. Once the green LED goes solid, disconnect the unit from the PC. The rmware update is
nished.
9. Repeat these steps for both the transmitter and receiver.
10. Set the Utility dial back to 1 or 4 for normal operation.
Bekijk gratis de handleiding van Atlona AT-HDR-EX-100CEA-TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-HDR-EX-100CEA-TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1138 MB |
